Visit www.engineeringshock.com and www.electroniclessons.com Today =)
Browsing Posts tagged setting
Mini Dual Setting Super Capacitor Charger with ADC
January 8, 2012
4 comments
Which charger setting to charge my car battery: “conventional/low maintenance” or “no maintenance/deep cycle”?
December 9, 2011
2 comments
I have a one-year-old Die Hard car battery that I want to recharge with a 10-amp wall battery charger. The charger has two settings: “conventional / low maintenance” and “no maintenance / deep cycle”. Which one should I use? What do the settings mean? Thanks!
6 volts 6 amps 12 volts 2 amps 12 volts 6 amps
Can I use a 12 volt battery charger to charge a 6 volt battery if I use the 1.0 amp setting?
November 27, 2011
5 comments
What setting to use on a schauer model crmf 612 battery charger for deep cycle batteries?
November 22, 2011
1 comment
This is an older model schauer 10 amp charger with 6/12 volt setting and conventional, manual and maint. free settings. It says it is good for deep cycle also. I am not sure what setting to use for deep cycle. I am sorry, for those of you that can’t figure it out, I no longer [...]
At what setting do you need to use a battery charger to start a kickstart motorcycle?
November 21, 2011
4 comments
How many amps at 12 volts does a 750cc honda need to start if kickstarting? What requires the electricity besides the sparkplugs? If there are too many amps will this hurt the bike?
I tryed , by removing the battery and also change my Jumper setting, but still i could not able to chng passwo?
November 21, 2011
2 comments
How to reset the BIOS password
what setting do i use on a digital multi tester. to determine what circuit is draining my battery keys off?
November 13, 2011
1 comment
trying to determine which circuit is staying open draining my battery I need to know what setting to use on my tester to detect draws in milliamps while its connected to neg side battery post and neg side cable pos is still connected to car BASICALLY THE SETTINGS TO FIND A PARASITIC DRAW
How do I know which setting to use on my battery charger?
November 7, 2011
2 comments
I can’t tell if my lawn tractor battery is wet, gel or AGM, and a new charger requires that I push a button to make a choice. The old battery (in need of a charge) has two long plastic pieces on top that are similar to the old-style cell caps, but I don’t think they’re [...]
PowerTask 610008 12V 10/2 Amp Dual Rate Automatic Battery Charger with Deep Cycle Charging Setting
September 2, 2010
No comments
Charges 10-100 ampere hours lead-acid batteries, is equipped with deep cycle battery charging setting, is made of heavy duty powder coated steel case for durability 2 ampere trickle charge for slow maintenance charge, or charging small 12 volt batteries 10 ampere recharges 12 Volt batteries in 6-8 hours Automatic overcharge protection to prevent overcharging of [...]
© 2012 Battery Charger Review
battery tester battery maintainer battery jum starters battery chargers battery cable battery tender About