BATTERY TENDER ADAPTER – BATTERY TENDERS -
August 19, 2010
No comments
- Distributor Part # 56-1141
- Manufacturer Part # 081-0069-5
Product Description
BATTERY TENDER ADAPTER – BATTERY TENDERS -
Browsing Posts in Battery Tender
- 4 stage charging
- Two circuits provide a safe 20 amps to each side of the charger
- Each circuit can be used independently or together
- Completely safe operation
- 2 year warranty
Product Description
Battery Tender 12V DVD Dual Output Charger provides 12 volts at 20 amps per circuit. The heavy duty black annodized steel charger is capable of being switched from AGM to standard batteries on each circuit seperately or together. A series of lights on the front of the charger shows the stage of recharge on each circuit. Each circuit acts independently or if needed both sets of alligator clamps can be attached to the same battery and produce 40 amps of current. This is a heavy duty charger designed for heavy duty batteries used in trucks, construction equipment and marine markets.
Battery Tender 021-1158-12 12V DVD Dual Output Battery Charger
Harley-Davidson® SuperSmart® Battery Tender®
August 5, 2010
No comments
- It’s better than a trickle charger, because of the “smart” feature that turns itself on and off as needed, so your battery never overcharges.
- Accepts North American voltage (120V), supplied with 2-prong unpolarized plug. Output is 12 VDC @ 750 mA.
- Charger output leads are equipped with quick disconnect black connectors.
- 5 year manufacturers warranty.
- Typical Recharge Time: 8 – 12 Hours.
Product Description
SuperSmart® Battery Tender®
Many of the same features as the Global Battery Charger, but smaller and more economical. It’s better than a trickle charger, because of the “smart” feature that turns itself on and off as needed, so your battery never overcharges. Accepts North American voltage (120V), supplied with 2-prong unpolarized plug. Output is 12 VDC @ 750 mA. Charger output leads are equipped with quick disconnect black connectors. Kit includes a quick-disconnect 7.5 Amp fused Battery Charging Harness with ring terminals that can attach to the battery screw terminals for easy connection, and a 7.5 Amp fused alligator clip charging harness. 5 year manufacturers warranty. Typical Recharge Time: 8 – 12 Hours.
94654-98B
750mA
- Battery Tender 12.5 ft. Extension Lead
- Extend the reach of your Battery Tender battery charger!
Product Description
BATTERY TENDER BATT CHRG EXT CORD 12.5′ 081-0148-12
Pulse Tech 100X830 Accessory Ring Style Bolt On CABLE ADAPTOR LEADS Xtreme Charge Ready Pls Chargers
May 27, 2010
No comments
- Pulse Tech 100X830 Accessory Ring Style Bolt On CABLE ADAPTOR LEADS Xtreme Charge Ready Pls Chargers
- CABLE ADAPTOR LEADS LEAVE ON
- Accessory designed specifically for use with the Xtreme Charge and Ready Pulse-12 Charging Systems Accessory designed specifically for use with the Xtreme Charge and Ready Pulse-12 Charging Systems
- Accessory designed specifically for use with the Xtreme Charge and Ready Pulse-12 Charging Systems
Product Description
XTREME CHARGE BY PULSE TECHAccessory Eyelet Style Leads for BATTERY MAINTENANCE SYSTEMDesigned to work with the PulseTech Battery Maintenance System.Round Eyelet Leads designed to attach to battery terminals and leave on the vehicle for Plug and Play use of the Extreme Charge Battery Maintenance System.
Pulse Tech 100X830 Accessory Ring Style Bolt On CABLE ADAPTOR LEADS Xtreme Charge Ready Pls Chargers
Battery Shut Off Switch Fuse Link
May 27, 2010
No comments
Product Description
Fuse Link (uses replaceable 5 amp fuses). Picture may be different from actual product.
Battery Shutoff Switch w/Instructions
May 26, 2010
No comments
Product Description
Simple to install and easy to operate, this shut-off switch ensures that everything is disconnected. Attach the switch to either the positive or negative terminal of your battery and the cable to the switch. Then unscrew the knob and take it with you to disable your car and discourage thieves. On computer controlled vehicles from 1982 to present, use the Computer Memory Saver (25036) or Fuse Link (25049) to preserve the computer’s settings when the battery is disconnected. The Fuse Link will allow enough currect through to maintain computer, radio settings etc. but will not allow car to be started.
- Helps prevent owners from being stranded by a dead battery
- Extends battery life by alerting users to damaging charge conditions
- Advanced CrankCheck technology tests battery health every time the engine is started
- Audible alarms and an easy-to-read LCD screen keep users informed of battery status
- Designed specifically for automobile engine starting applications
Product Description
Argus Battery Bug Starting Battery Monitor provides real-time information on the health of the car battery or other engine starting battery. This battery monitor checks the battery at every start while it displays the remaining battery life, present battery voltage and alternator or charging voltage. It comes with an alarm which alerts when the battery gets old and nears the end of its life.Amazon.com Product Description
You count on your vehicle’s ability to crank every time, so don’t get left in the dark by a dead car battery. The Argus BB-SMB12 Battery Bug Starting Battery Monitor uses advanced CrankCheck technology to test the health of the battery every time the engine is started, tracking the decay of cranking health over time. It clearly indicates battery health on the easy-to-read display, and audibly alerts you when performance begins to drop to dangerously low levels.
 The Battery Bug is compact and easy to install. |
Extend Battery Life by Avoiding Damaging Charge Conditions
It’s a fact: any battery will naturally lose its charge over time, no matter if it’s in your daily driver or a garaged beauty. Once fully discharged, a battery will start to permanently lose its overall capacity. This results in weaker performance, even when fully recharged.
The Argus BB-SMB12 Battery Bug Starting Battery Monitor can significantly extend your battery’s life by monitoring its charge level. Its on-board microprocessor continuously monitors decay in battery cranking performance and calculates your battery’s total state of cranking health. It also monitors alternator and charger performance for damaging over-charge and under-charge conditions. If the battery reaches a low state of charge, the Battery Bug will sound an audible alarm indicating the need for recharge or replacement. Perfect for colder climates, the Battery Bug also measures battery temperature and adjusts the cranking state of health alarm for extreme low temperatures.
 The display is easy to read and understand. |
Intuitive Display and Alarms Provide a Clear Picture of Battery Health
The Battery Bug’s information-packed LCD display shows critical battery health and performance information that’s easy to read and understand. A graphical indication of cranking health remaining and the performance of the most recent engine start appear at the top of the display. Below that is a numerical gauge that shows cranking health remaining, battery voltage, and alternator/charger voltage. Low Battery and Replace Battery icons at the bottom of the display indicate what actions need to be taken when the audible alarm is active.
If the battery needs attention, the Battery Bug will alert you with its on-board audible alarm. The Low Battery alarm will sound when a chronic undercharge condition (below 12.1V for more than 30 seconds) is detected. An overcharge alarm will sound when the alternator or charger voltage exceeds 15 Volts. Finally, the Replace Battery alarm will activate if the cranking health of the battery drops below 10%.
Easy to Install in Any Vehicle
The Battery Bug comes equipped with universal “Y” connectors that can be easily attached to most battery posts or clamps. The Battery Bug can also be attached to remote battery terminals without significantly affecting test results. It’s engineered tough to survive under the hood, and the coiled cables let you place it up to 18 inches away from the battery. The Battery Bug consumes very little power–about the same amount as your vehicle’s digital clock–and will not adversely affect battery performance. The Battery Bug can also be attached to two batteries in parallel, and the preferred installation is to attach it diagonally across the pack. The black wire should attach to the negative post at one end of the pack, and the red wire should attach to the positive post at the other end of the pack.
The Battery Bug is easy to reset as well, just disconnect one of its wires and the memory will be erased. It is recommended that you reset the Battery Bug if it shows the Replace Battery icon. If the Replace Battery icon illuminates again at the next attempted start, you can be confident that a battery replacement is justified.
Choosing the Battery Bug That’s Right for You
The CrankCheck and charge level monitoring software embedded in the Argus BB-SMB12 Battery Bug Starting Battery Monitor is designed specifically for cars, light trucks, emergency equipment, generators, and other starting batteries for engines typically larger than 1500CC. For motorcycle, power sports equipment, and other small engine starting batteries, choose the Argus BB-SBM12-PS Battery Bug Battery Monitor for Motorcycles.
The Argus Battery Bug Deep Cycle Series is recommended for marine, RV, worksite, and other heavy-duty applications that involve deep-cycle batteries. Choose the BB-DCM12-300 for applications up to 300Ah, the BB-DCM12-150 for applications up to 150Ah, BB-DCM12-100 for applications up to 100Ah, or the BB-DCM12-90 for applications up to 90Ah.
BATT CHARGER 12V 5AMP – BATTERY TENDER -
May 25, 2010
No comments
- Distributor Part # 3807-0003
- Manufacturer Part # 022-0142-DL-WH
Product Description
BATT CHARGER 12V 5AMP
Product Description
Battery Tender DVS – 20 Heavy – Duty Fast Chargers… fast, effective Chargers you can count on in a jam! These portable Chargers have been servicing the marine industry for years, and are ready to power up and maintain your boat battery’s strength! Employ a maximum power output of 300 watts out of your 12-volt output with a 40 amp current. Features a variety of software configurations to suit your needs: DELCO, standard, seals, VRLA, GRT, AGM and GEL. You’ll appreciate the status indicator lights that keep you abreast of the charging status: Solid Green means the charger is ready to begin charging the battery; Solid Red means your battery is charging normally; Flashing Red means the charger is experiencing an abnormal condition and Flashing Green means the charge is complete. All Chargers come with jumper cable-type harnesses with heavy-duty alligator clamps. Has short-circuit and reverse polarity protection for your safety. Choose between a Single-Sealed AGM and Standard Charger. Single-Sealed Standard Battery features: Equalization voltage: 15.6 ; Float Voltage: 13.6 ; Dimensions: 9 x 6 3/4 x 6 3/4″; Weighs 19 lbs.; Pick up this handy, carry-along helper now! Battery Tender DVS-20 Heavy-Duty Fast Chargers, Standard & Delco
Battery Tender® DVS – 20 Heavy – Duty Fast Chargers Standard & Delco
